SIG SAUER SSG 3000 - Manual (Page 46)

46 www.sigsauer.com
Figure 15A
7.3.2 Adjust buttpad length
1. Use a phillips screwdriver to remove both buttpad
screws. The screws are recessed below the surface of
the pad, inside the two holes on the pad.
2. Add or remove spacers between the stock and the
buttpad to achieve the desired length.
3. Lubricate the two buttpad screws with soap, and
reinstall.
515
515
516
Figure 15B
519
14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 46 3/27/14 11:17 AM