SIG SAUER SSG 3000 - Manual (Page 47)

www.sigsauer.com 47
8.0 Dismantling
8.1 Removing the stock
1. Open the bolt and remove it (see section 5.6.2).
2. Slacken off and remove the rear 514 and front 512
stock retention screws.
3. Remove the filler piece 511 from the magazine stock.
4. Lift the system out of the stock.
W
WARNING
Rifle is ready to fire and may lead to death or severe injuries.
• There must be no magazine in the gun.
• Before stripping your gun, ensure once again that it is unloaded (see section 5.6).
Figure 16
14SIG1027_OM-SSG3000-USA_MiniManual_PeaseREV05.indd 47 3/27/14 11:17 AM