SIG SAUER SIG 551-A1 Rifle - Manual (Page 26)

26 www.sigsauer.com
Elevation (up / down) adjustment:
Elevation adjustments are made by raising or lowering the sight plate, inset on the back
side of the rear sight blade.
- Loosen the phillips head screw
- Move the sight plate in the direction required for adjustment.
- Tighten the phillips head screw.
- Slide rear sight blade up to move impact up.
- Slide rear sight blade down to move impact down.
One mark of movement on the rear sight blade will move the impact of the rounds
approximately 3/4” to 1” at 100 yards.
12SIG541_SIG551_A1MiniManual_Rev1.indd 26 2/17/12 2:48 PM