SIG SAUER SIG556xi - Manual (Page 40)

40 www.sigsauer.com
3.5 Reloading (Rifle empty, bolt locked open)
1. ensure the safety lever is in the “S” (Safe) position;
2. remove the magazine by pressing the magazine catch;
3. insert a loaded magazine and check that it is properly seated;
4. release the bolt catch fully by:
a. depress the bolt catch upward; or
b. Pull the charging handle back slightly and release.
always make sure the muzzle is pointed in a safe direction!
waRning
never attempt to load or unload any firearm inside a vehicle, building, or other confined
space (except a properly constructed shooting range). enclosed areas frequently offer no
completely safe direction to point the firearm; if an accidental discharge occurs, there is
great risk of bodily injury or property damage.
Before loading, always clean all grease and oil from the bore and chamber, and check to be
certain that no obstruction is in the barrel. any foreign matter in the barrel could result in a
bulged or burst barrel or other damage to the firearm, and could cause serious injury to the
shooter or to others.
Keep the muzzle pointed in a safe direction and your finger away from the trigger when
cocking any firearm.
BOlT CATCH
CHARGiNG HANDle