SilentKnight 5700 - Manual (Page 50)

Model 5700 Installation and Operation Manual 151295
4-21
4.8.1 FACP Connection
The 5865 connects to the panel via the SBUS. Make connections as shown in Figure 4-24. After the 5865 is
connected to the panel, it must be added to the system. This programming step is described in Section 4.9.
Figure 4-24 5865 Connection to the FACP
4.8.2 5865 Mounting
Mount the 5865-4 to a standard 4-gang electrical box. Mount the 5865-3 to a standard 3-gang electrical box. In
Figure 4-25, the 5865-4 attached to a 4-gang box is used as an example.
Figure 4-25 5865 Mounting Example
The 5865 ships with a set of zone description labels that can be inserted into the 5865 board assembly. These
labels can be used in a typewriter or can be written on by hand.
Slide the labels under the plexiglass as shown in Figure 4-26. The LEDs will show through the label when
Supervised
Power Limited