Document Outline

• Contents
• Section 1 Introduction
  • 1.1 Overview of Basic System
    • 1.1.1 Hardware Features
    • 1.1.2 Software Features
  • 1.2 About this Manual
    • 1.2.1 Terms Used in this Manual
  • 1.3 Compatible Products
  • 1.4 How to Contact Silent Knight
• Section 2 Agency Listings, Approvals, and Requirements
  • 2.1 Federal Communications Commission (FCC)
  • 2.2 Underwriters Laboratories (UL)
    • 2.2.1 Requirements for All Installations
    • 2.2.2 Requirements for Central Station Fire Alarm Systems
    • 2.2.3 Requirements for Local Protected Fire Alarm Systems
    • 2.2.4 Requirements for Remote Station Protected Fire Alarm Systems
    • 2.2.5 Requirements for Auxiliary Protected Fire Alarm Systems for Fire Alarm Service
• Section 3 Before You Begin Installing
  • 3.1 What’s in the Box?
  • 3.2 Environmental Specifications
  • 3.3 Electrical Specifications
  • 3.4 Wiring Specifications
  • 3.5 Board Assembly Diagram
  • 3.6 Calculating Current Draw and Standby Battery
    • 3.6.1 Current Draw Worksheet Requirements
      • 3.6.1.1 Current Draw Worksheet for SK SLC Devices
      • 3.6.1.2 Current Draw Worksheet for SD SLC Devices
      • 3.6.1.3 Maximum Battery Standby Load
  • 3.7 Installation Tasks Overview
• Section 4 Control Panel Installation
  • 4.1 Mounting the Control Panel Cabinet
    • 4.1.1 Preventing Water Damage
    • 4.1.2 Removing the 5808 Assembly from the Housing
  • 4.2 AC Connection
  • 4.3 Battery Connection
    • 4.3.1 RBB Accessory Cabinet
      • 4.3.1.1 Installing the RBB Accessory Cabinet and Batteries
  • 4.4 SBUS Wiring
    • 4.4.1 Calculating Wiring distance for SBUS modules
    • 4.4.2 Wiring Configurations
  • 4.5 5860 Remote Annunciator Installation
    • 4.5.1 Mounting the 5860
      • 4.5.1.1 Flush Mounting
      • 4.5.1.2 Surface Mounting
    • 4.5.2 Connecting the 5860 to the Panel
  • 4.6 5824 Serial/Parallel Printer Interface Module Installation
    • 4.6.1 Selecting 5824 Options
  • 4.7 5880 LED I/O Module
    • 4.7.1 5880 Board Layout
    • 4.7.2 FACP Connection
    • 4.7.3 LED Wiring
    • 4.7.4 Dry Contact Wiring
  • 4.8 5865-3 / 5865-4 LED Annunciator Installation
    • 4.8.1 FACP Connection
    • 4.8.2 5865 Mounting
  • 4.9 Configuring Modules
    • 4.9.1 Assigning Module IDs
  • 4.10 Telephone Connection
  • 4.11 Notification Appliance/Auxiliary Power Circuits
    • 4.11.1 Conventional Notification Appliance
      • 4.11.1.1 Class B Notification Wiring
      • 4.11.1.2 Class A Notification Wiring
    • 4.11.2 Auxiliary Power Installation
      • 4.11.2.1 Door Holder Power
      • 4.11.2.2 Constant Power
      • 4.11.2.3 Resettable Power
      • 4.11.2.4 Sounder Sync Power
  • 4.12 On-Board Programmable Relays (Conventional)
    • 4.12.1 Trouble Relay
    • 4.12.2 Programmable Relays
  • 4.13 Remote Station Applications
    • 4.13.1 Keltron Model 3158 Installation
    • 4.13.2 City Box Connection Using the 5220 Module
    • 4.13.3 NFPA 72 Polarity Reversal
      • 4.13.3.1 Using the 5220 Module
      • 4.13.3.2 Using the 7644-L8 Module
    • 4.13.4 Using the SD500-ARM Addressable Relay Module
    • 4.13.5 Using a MR-201/T Control Relay From Air Products
    • 4.13.6 Transmitter Activated by Dry Contacts
• Section 5 SK and SD SLC Device Installation
  • 5.1 List of SK SLC Devices
  • 5.2 List of SD SLC Devices
  • 5.3 Maximum Number of Devices
  • 5.4 Wiring Requirements for SLC Devices
    • 5.4.1 Wiring SLC in Style 4 (Class B) Configuration
    • 5.4.2 Wiring SLC in Style 6 & 7 (Class A) Configuration
  • 5.5 SK Detector Installation
    • 5.5.1 Wiring SK detectors:
  • 5.6 Addressing SK SLC Devices
  • 5.7 SD Detector Installation
    • 5.7.1 Wiring SD Detectors
  • 5.8 Addressing SD Devices
    • 5.8.1 SD505-APS, SD505-AHS, & SD505-AIS
    • 5.8.2 SLC Devices with DIP Switches
• Section 6 Programming Overview
  • 6.1 JumpStart Autoprogramming
    • 6.1.1 Input Points
    • 6.1.2 Output Points
    • 6.1.3 Running JumpStart AutoProgramming
  • 6.2 Mapping Overview
    • 6.2.1 Input Point Mapping
    • 6.2.2 Output Circuit Mapping
    • 6.2.3 Zone Event Mapping
    • 6.2.4 Mapping LED Points
  • 6.3 Programming Using the 5660 Silent Knight Software Suite
  • 6.4 Programming Using an Annunciator
    • 6.4.1 Entering / Exiting the Programming Menu
    • 6.4.2 Moving through the Menus
    • 6.4.3 Selecting Options and Entering Data
    • 6.4.4 Editing Keys
  • 6.5 Programming Menu Quick Reference
• Section 7 Programming
  • 7.1 UL 864 Programming Requirements
  • 7.2 Modules
    • 7.2.1 Edit Modules
      • 7.2.1.1 Naming Modules
      • 7.2.1.2 Module, Wiring Class
    • 7.2.2 Adding a Module
    • 7.2.3 Deleting a Module
    • 7.2.4 View Module List
  • 7.3 Zone
    • 7.3.1 Edit Zone
      • 7.3.1.1 Edit Zone Name
      • 7.3.1.2 Edit Zone Properties
      • 7.3.1.3 Zone Outputs
      • 7.3.1.4 Cadence Patterns
      • 7.3.1.5 Zone Accessory Options
    • 7.3.2 Add Zone
    • 7.3.3 Delete Zone
    • 7.3.4 View Zone Points
  • 7.4 Group
    • 7.4.1 Edit Group
      • 7.4.1.1 Edit Group Name
      • 7.4.1.2 Edit Group Properties
    • 7.4.2 Add Group
    • 7.4.3 Delete Group
    • 7.4.4 View Group Points
    • 7.4.5 Edit Output Group Templates
  • 7.5 Point
    • 7.5.1 Point Programming for the SLC
    • 7.5.2 Point Programming For Internal or External Power Module
    • 7.5.3 Point Programming For 5880 and 5865 Modules
    • 7.5.4 Assigning a Name to a Point
  • 7.6 System Options
    • 7.6.1 Reporting Account
      • 7.6.1.1 Edit Accounts
      • 7.6.1.2 Auto Test Time
    • 7.6.2 Phone Lines
      • 7.6.2.1 Dialing Prefix
      • 7.6.2.2 Number of Answer Rings
      • 7.6.2.3 Dial Option (TouchTone or Pulse)
      • 7.6.2.4 Rotary Format
      • 7.6.2.5 Line Monitor
      • 7.6.2.6 Answering Machine Bypass
    • 7.6.3 System Event Outputs
      • 7.6.3.1 Trouble Events
      • 7.6.3.2 System Alarm Cadence
    • 7.6.4 Time Options
      • 7.6.4.1 Water Flow Delay
      • 7.6.4.2 Alarm Verification Time
      • 7.6.4.3 Low AC Report Delay
      • 7.6.4.4 Clock Display Format (AM/PM or Military)
      • 7.6.4.5 Change AC Line Frequency
    • 7.6.5 Miscellaneous Options
      • 7.6.5.1 Synchronize Strobes Active During Silence
      • 7.6.5.2 Auto Display Oldest Event
      • 7.6.5.3 Report by Zone or by Point
      • 7.6.5.4 Plex Door Option
      • 7.6.5.5 Single Key Acknowledge
    • 7.6.6 Daylight Savings
      • 7.6.6.1 Automatic Daylight Saving Time Adjustment
      • 7.6.6.2 Daylight Saving Time Start and End
    • 7.6.7 Edit Banner Message
    • 7.6.8 SLC Family
  • 7.7 JumpStart Autoprogramming
  • 7.8 Computer Account
  • 7.9 Access Codes
    • 7.9.1 Profile Edit Menu
      • 7.9.1.1 Edit Name
      • 7.9.1.2 Edit Access Code
      • 7.9.1.3 Panel Functions
• Section 8 System Operation
  • 8.1 Default User and Installer Codes
  • 8.2 Annunciator Description
    • 8.2.1 LCD Displays
    • 8.2.2 Banner
  • 8.3 Key Operation
  • 8.4 Menu System
    • 8.4.1 Main Menu Overview
    • 8.4.2 Using the Menus
  • 8.5 Basic Operation
    • 8.5.1 Setting Time and Date
    • 8.5.2 Disable / Enable NACs by Group
    • 8.5.3 Disable / Enable a Template
    • 8.5.4 Disable / Enable a Zone
    • 8.5.5 Disable / Enable a Point
    • 8.5.6 View Event History
    • 8.5.7 Clear Event History
    • 8.5.8 Conduct a Fire Drill
    • 8.5.9 Conduct an Indicator Test
    • 8.5.10 Conduct a Walk Test
    • 8.5.11 Conduct a Dialer Test
    • 8.5.12 Silence Alarms or Troubles
    • 8.5.13 Reset Alarms
    • 8.5.14 Check Detector Sensitivity Through Point Status
    • 8.5.15 View Status of a Point
    • 8.5.16 View Alarms, Supervisories or Troubles
    • 8.5.17 View System Information
    • 8.5.18 Reset Items
      • 8.5.18.1 Reset Dialer
      • 8.5.18.2 Reset DSP USB
    • 8.5.19 Communicating with a Remote Computer
    • 8.5.20 Working with a Printer
  • 8.6 Operation Mode Behavior
  • 8.7 Releasing Operations
    • 8.7.1 Single Interlock Zone Releasing
    • 8.7.2 Double Interlock Zone Releasing
  • 8.8 Smoke Alarm Verification
• Section 9 Reporting
  • 9.1 Receivers Compatible with the Control Panel
  • 9.2 Reporting Formats Table
• Section 10 Testing and Troubleshooting
  • 10.1 Troubleshooting
  • 10.2 Common Problems
    • 10.2.1 Periodic Testing and Maintenance
    • 10.2.2 Event History
  • 10.3 Built-in Troubleshooting and Testing Tools
    • 10.3.1 SLC Device Locator
    • 10.3.2 SLC Multi Locator
    • 10.3.3 I/O Point Control
  • 10.4 Impedances that Cause Earth Ground Faults
• Section 11 Installation Records
  • 11.1 SLC Device Point Record
• Appendix A Compatible Devices
• Appendix B Special Characters Lists
• Silent Knight Fire Product Warranty and Return Policy
• Manufacturer Warranties and Limitation of Liability
• Model 5808 Basic Operating Instructions