SilentKnight 5895XL 6A Intelligent Remote Power Supply - Manual (Page 28)

Model 5895XL Intelligent Power Module Installation and Operation Manual
3-8 151142
3.5.2.2 Class A Notification Wiring
You must use an appliance from the list of compatible appliances in the Appendix A at the
back of this manual.
To install a Class A notification appliance circuit:
1. Wire the Class A notification appliances as shown in Figure 3-9.
2. Configure the circuit for Class A in programming (see Section 7.4 of the Installation
Manual P/N 151209).
Figure 3-9 Class A Notification Appliance Circuit Configuration
Note: In programming any point that uses multiple I/O circuits are always referred to as the lowest I/O circuit
number used. For example, Figure 3-9 uses both I/O circuit 5 and 6, so in programming it would be
referred to as point 5.
Regulated