Vermont Casting 1450 - Manual (Page 14)

14
Encore 1450 Non-Catalytic Woodburning Stove
30002425
St504
Alcove cutaway
11/00
ST504
Fig. 19 Cutaway perspective of acolve installation.
63"
60" Min.
to Alcove
Ceiling
ST506
Alcove front view
11/00
Ceiling sup-
port package
extends 2”
below Durock®
(or equivalent)
ceiling
1” air gap,
top and bot-
tom, on both
sides and
back wall
NOTE: From
60” to 63”
must be
covered by a
noncombus-
tible material. ST506
Fig. 21 Front Section; 63” min. clearance from finsihed floor
surface to combustibles on front face. Combustible facing
may overlap metal studs by only 1”. It should not extend be-
low the height of the noncombustible ceiling.
21���"
14���"
43" Min.
12"
Min.
36"
Max.
ST505
Alcove Ceiling plan
11/00
Existing Combus-
tible Framing
Metal studs
support 7/16”
Durock® (or
equivalent)
ceiling
ST505
Fig. 20 Reflected ceiling plan.