Solvline SerialGate - Manual (Page 29)

SerialGate User Guide
29

Serial: RJ-45 socket for serial ports (RS-232, or Combo(RS-422/485))

Power connector
AC Version: for connection of AC100~245V cable
DC Version: for connection of DC12V adapter cable and terminal block power cable
Terminal Block and DC Adapter Jack connect different power at the s
ame time power is applied at the same time as it may cause irrepara
ble damage to the product, if you do not!

Reset: SerialGate reboots if this button is pressed for less than 3 seconds. If pressed for
longer than 3 seconds, SerialGate will restore factory default settings.

LED: Operation status of SerialGate. Next section describes the meaning of each LED
display status.

WAN: Main network port used when connecting SerialGate to networking devices such
as Ethernet card, hub, and router.

LAN:
보조 네트워크 포트로 NAT 모드로 동작하여 SerialGate에서 하부 네트워크에 연
결된 디바이스와 연결하거나 Bridge 모드로 동작하여 Switch 포트 역할을 한다.

SD / MMC: SD memory card works for system log. Available up to 32 Gbytes. (SD memory
not included in the package)