Solvline SerialGate - Manual (Page 81)

SerialGate User Guide
81
Gateway address is shown
def dns
<IP Address>
168.126.63.1 Set IP address of Domain Name Service
def portviewip
<IP address>
0.0.0.0
Configures IP of PC which Portview is installed
If IP is set to 0.0.0.0, Portview feature is disabled.
(Please refer to Portview User Manual in SerialGate
Utility & Documents CD for detailed information.)
def portviewport
<Port number>
4000 Set the socket number of a PC which Portview is installed.
def ftp
[enable/ disable]
Enable
Enable or disable FTP service.
If disabled, you cannot connect to SerialGate via FTP.
def telnet
[enable/ disable]
Enable
Enable or disable Telnet service.
If disabled, you cannot connect to SerialGate via Telnet.
def web
[enable/ disable]
Enable
Enable or disable Web service.
If disabled, you cannot connect to SerialGate via Web.
def ssh
[enable/ disable]
Disable
Enable or disable SSH service.
If enabled, you can connect to SerialGate via SSH.
def name
[SerialGate name]
Product Name Set the name of SerialGate. (Max 32 bytes)
def snmp
[enable/ disable]
Disable
Enable or disable SNMP(Simple Network Management
Protocol)
- MIB-II(RFC 1213): System, Interface, IP, ICMP, TCP,
UDP - MIB-I (RFC 1317): Serial Interface
def v1readwrite
[enable, disable]
Disable
SNMP V1/2 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to
"ReadOnly. ”
In order to read and write attributes change the feature to
"ReadWrite. ”
(Options : ReadOnly/ ReadWrite)
def v3readwrite
[enable, disable]
Disable
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only change the feature to
"ReadOnly. ”
In order to read and write attributes change the feature to
"ReadWrite. ”