Solvline SerialGate - Manual (Page 84)

SerialGate User Guide
84
Commands Default Description
def port x keepalive
<0 ~ 65535>
0
After a certain amount of time passes without any
communication after the socket connection between the
given serial port and the server is established, automatically
disconnect the socket connection.
def port x latency
<msec>
0
This needs to be set when consecutive data from the given
serial port needs to be transmitted to socket at once.
def port x login
<Enable/Disable>
Disable
When the Operation Mode is set to TCP Server, ask for the
username and password when the client tries to connect.
def port x loginname
<username>
None
When the Operation Mode is set to TCP Server, set the
username to ask for(Max 8 bytes)
def port x loginpass
<password>
None
When the Operation Mode is set as TCP Server, set the
password to ask for( Max 8 bytes)
def port x
termination
<Enable/Disable>
Disable Set termination for each port. (only SG-1160 Model)