Solvline Eddy Serial v2.5.1.1 - Manual (Page 50)

Eddy User's Guide
50
Menu Default Descriptions
Device
Select
LCD
Set the purpose of the I2C 16 Bit I/O channel.
LCD: Set the G-LCD mode.
If you set to the LCD, you cannot use it for the DIO port.
DIO: Set the DIO 16 channel mode.
You can set input or out 16 channel as like the GPIO.
If you set to the DIO, you cannot use it for the G-LCD.
5.8 SNMP Settings
You can set the communication and operation environment for the SNMP Agent. After changing values, you need to
click ‘Submit’ button. Then you will see the same page with modified values. Please note that you have to
‘Save & Reboot’ in order to see these changes in effect. Changes will be discarded if you do not save current
settings.