Sonics VCX134 User Manual
Page 8
FUNCTIONS OF KEYS, CONTROLS, INDICATORS, AND CONNECTORS (cont.)
REAR PANEL
9 pin D-sub connector
Connects to external actuation device, and enable power and frequency
monitoring.
Footswitch jack
Connects to the footswitch cable.
Coax connector
Connects to the converter.
Power module
Connects to the electrical line cord and encases the fuse(s).
9-PIN D-SUB CONNECTOR
Pin No.
Description
1 Not
connected
2 Not
connected
3 Not
connected
4
Enables connection to a frequency counter.
5
Enables connection to an external power monitor (5 mv = 1 watt)
6 Ground
7 Energizes
the
ultrasonics
when connected to ground.
8 and 9
Enables the intensity to be remotely adjusted using an external 10k
potentiometer. See below
NOTE
To vary the intensity remotely using a variable DC power supply (0-5V) instead of a 10 K
potentiometer, connect positive to pin 8 and negative to pin 6.
8