Sonics VC5040AT - Manual (Page 5)

SECTION 1 – INSTALLATION
INSPECTION
Prior to installing the Ultrasonic Atomizer, perform a visual inspection to detect any
evidence of damage, which might have occurred during shipment. Before disposing of
any packaging material, check it carefully for small items.
The Ultrasonic Atomizer was carefully packed and thoroughly inspected before leaving
our factory. The carrier, upon acceptance of the shipment, assumed responsibility for its
safe delivery. Claims for loss or damage sustained in transit must be submitted to the
carrier.
If damage has occurred, contact your carrier within 48 hours of the delivery date.
DO
NOT OPERATE DAMAGED EQUIPMENT. Retain all packing materials for future
shipment.
ELECTRICAL REQUIREMENTS
The Ultrasonic Atomizer requires 24 volts DC. A universal 100V~240V, 50/60 Hz AC to
DC switching mode power supply capable of delivering 24 volts at 2.5 amperes is
supplied with your atomizer.
INSTALLING THE ULTRASONIC ATOMIZER
The Ultrasonic Atomizer should be installed in an area that is free from, air drafts,
excessive dust, dirt, explosive and corrosive fumes, and extremes of temperature and
humidity.
5