TeeJet IC18 SPREADER JOB COMPUTER - Manual (Page 30)

25
98-05173 R1 US
ISOBUS Job Computer : IC18 Spreader NA
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
Implement Speed Sensor
Figure 3-23: Calibrations
Figure 3-24: Implement Speed Sensor
The Implement Speed Sensor establishes the wheel
pulses over a specified distance. This value can be
established manually or calibrated automatically.
Manual Calibration
Manual calibration establishes the pulses based on a user
entered value.
• To select the Pulses per Distance, use the number
pad or slide bar.
Automatic Calibration
Automatic calibration establishes the pulses using the
automatic calibration function.
• To calibrate the pulses per distance, select
CALIBRATION KEY .
• Follow the series of instructions displayed.
• Select the ACCEPT KEY to complete the
calibration
The counted wheel pulses will be displayed during the
automatic calibration.