TeeJet IC18 SPREADER JOB COMPUTER - Manual (Page 37)

32
www.teejet.com
ISOBUS Job Computer : IC18 Spreader NA
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
VT Data
Figure 3-34: VT Data
Figure 3-35: TECU
Figure 3-36: About
The Virtual Terminal (VT) menu provides information
regarding the virtual terminal controller (i.e., address
version, etc.).
• If more terminals/controllers are used, switch
between these by pressing the GO TO NEXT VT
KEY .
• Press the DELETE OBJECT POOL KEY to
force the VT to delete saved data and upload new
information from the IC18 Job Computer on the next
power cycle.
NOTE: Restart the IC18 Job Computer to implement and
display changes.
TECU
The TECU is a control unit, residing on the tractor, that
performs basic functions such as power handling, speed
info, etc. The TECU data are displayed on this page.
About
The About screen provides information on the IC18 such
as software version, build number, etc. This information
may become useful in case of technical support.