Chapter 2 – getting started, Start up, Isobus job computer : ic18 spreader na – TeeJet IC18 SPREADER JOB COMPUTER User Manual
Page 8
3
98-05173 R1 US
ISOBUS Job Computer : IC18 Spreader NA
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
CHAPTER 2 – GETTING STARTED
• A firm touch is required when selecting a screen icon.
• Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save the
setting. Select the ESCAPE KEY to escape without saving settings and return to the previous menu.
• The console needs to be cycled off and back on when changing or attaching equipment to the system.
• The menu structure on your display might vary from the one displayed in this User Manual depending on the
virtual terminal being used.
START UP
Power is continuously supplied to the job computer. The virtual terminal will give access to the job computer
options and operation.
Figure 2-1: Master Screen
Matrix VT Setup Key
IC18 Spreader
Master Screen Key
Other options as available on
ISOBUS system