TeeJet TASC-6500 - Manual (Page 46)

A-4
98-05019
Rev- 1
CE & S
TANDARD
V
ERSION
TASC 6200/6500
(See illustration below)
TASC uses the inherent capacitance of the vehicle battery to protect the electronics against voltage spikes
and electrical ground reference variations. For this reason:
IT IS EXTREMELY IMPORTANT THAT ALL CONNECTIONS BE MADE DIRECTLY TO THE VE-
HICLE BATTERY. ON VEHICLES WITH MORE THAN ONE BATTERY, ALL CONNECTIONS
SHOULD BE MADE TO THE SAME BATTERY.
All fuses will be located near the battery connection. TASC components use automotive type, in line fuses
that are readily available from any auto parts store or most automotive repair facilities.
CONNECT ALL POWER LEADS DIRECTLY TO THE VEHICLE BATTERY.
DO NOT SUBSTITUTE HIGHER AMPERAGE FUSES.
+12 Volts D.C.
Positive Terminal
Chassis Ground
Negative Terminal
Black Wires
Fuse Holder
DO NOT SUBSTITUTE HIGHER AMPERAGE FUSES.
THIS SYSTEM HAS BEEN DESIGNED TO GIVE OPTIMUM PERFORMANCE
WHEN CONNECTED AS SHOWN. POWER CONNECTIONS OTHER THAN
DIRECTLY TO THE VEHICLE BATTERY AND/OR THE USAGE OF HIGHER
AMPERAGE FUSES MAY DAMAGE THE SYSTEM AND VOID THE WARRANTY.
CAUTION !
Red Wires
A.4 FUSES AND POWER CONNECTIONS