TeeJet LH 4000 - Manual (Page 11)

LH 4000 O PERATORS MANUAL
LH A GRO 11
OPERATOR SELECTABLE FUNCTIONS
TRACTOR FUNCTIONS
METRE IN
TRACK:
The distance recorded in the
current track (tramline).
METRE: Recorded total metres
METRE START/
METRE STOP: Manual start/stop of distance
counter.
BATT.: Battery voltage
METRE IN TRACK:
The distance recorded in current track. You may use this function to locate a
position in the track (e.g. the spot where the tank ran empty).
This function is related to the "REDUCE TRA. M." (This function is only visible
whilst the sprayer is inactive.)
The "METRE IN TRACK"-counter is reset to NIL, each time the sprayer is shut
(e.g. at headlands).
However, should you shut the sprayer in a track, the computer memorises the
distance driven! And displays "REDUCE TRA. M."
NOTE!
Should you stop spraying at a position you would like to relocate, (E.g. if
you need to refill your tank) Proceed thus:
After refilling your tank drive to start of track (headland border). Press
"REDUCE TRA. M" and drive along the tramline. An audible and visual
warning will be given 5 metres before the location at which the tank ran
empty.
When the position is instruction is given to start spraying.
METRE.:
The total distance driven in metres.
This is measured with the wheel with the speed sensor fitted. You may choose
"manual" start/stop of counter. Or automatically via the override sensor (sprayer
main valve) switch. Select your mode in: "ENCODE" "METRE SWITCH".
or:
METRE START/ METRE STOP:
Manual Start/Stop of metre counter. The start/stop selection screen will only
appear if “MANUAL” has been selected in “ENCODE”.
BATT.:
The current voltage of battery.