TeeJet LH 4000 - Manual (Page 31)

LH 4000 O PERATORS MANUAL
LH A GRO 31
OTHER IMPLEMENT, ENCODE
This menu allows for encodements of your LH 4000 in conjunction with jobs other
than Spray-work.
NOTE!
Encodements in this menu do not interfere with the encodements you
may have done in the Sprayer-Menu!
NOTE! You must check your encodements through the "status" screen, which
will always be shown before you are allowed to enter the operation
screen.
HA LEFT
Before commencing your work, you may encode the size of the field. From this
parameter "End Time" is calculated.
WORKING WIDTH
The effective working width of your implement, ( in cm.) Do not forget the
"overlap", which may cause incorrect measurements.