TeeJet LH 4000 - Manual (Page 9)

LH 4000 O PERATORS MANUAL
LH A GRO 9
IMPORTANT! IMPORTANT! IMPORTANT!
The software program does not allow menu changes whilst the machine is moving.
This is to prevent operator mistakes and incorrect recordings.
"STATUS" SCREEN
Any time the "operation-menu" is selected, or you leave any encode menu, the
status screen will appear. Here all the current encoded values will be shown.
CHECK & ACCEPT the values before proceeding, by pressing the enter/return-
key.
NOTE!
Before start remember to cancel (reset) all relevant counters. (Area-litre
etc.) using the "DATA/DELETE" function, if required.
SPRAY-PROGRAM
From the basic menu, select sprayer:
Move cursor to "SPRAYER".
Press "SELECT".
From there you can choose:
OPERATION
ENCODE
DATA DELETE
LOG BOOK