TeeJet LH 1600M - Manual (Page 9)

LH 1600M O PERATORS MANUAL
LH A GRO 9
5. TRAMLINE METHOD
The monitor offers two different tramlining methods; one of these must be selected
before drilling commences.
UNEVEN METHOD
If the working width of the drill is divisible by the working width of the
sprayer/fertiliser distributor with an uneven figure, 3, 5, 7, or 9, you must select the
UNEVEN METHOD.
Example:
Sprayer Drill Bout no. (interval)
12 M 4 M 3
See Fig. 1
In this example, a bout number (tramline rhythm) of 3 is encoded. Tramlines are
made when the actual bout number is equal to the encoded bout number.
The actual track is counted each time the drill is raised.
Be aware when and especially when tramlines are not to be counted.
Bout counting can be controlled using the “HOLD” key or the “UP/DOWN” keys.