Canon Z5000 - Manual (Page 81)

3
3-45 Clearing the ColorPASS
N OTE : The only way to remove a password that you can’t remember is to reinstall
system software.
Verify New Password
Enter the new password again exactly as before to verify that you have entered it
correctly. If you make a mistake, you are prompted to enter the password again. The
new password is effective after you save changes and reboot the ColorPASS.
Exit Setup
Clearing the ColorPASS
The Clear Server command enables you to clear all queued print jobs from the
ColorPASS—jobs in the ColorPASS Print, Hold, and Printed queues. Jobs can also be
deleted, individually or as a group, from the job management tools. Clear Server also
clears the Job Log, all jobs archived on the ColorPASS hard disk, the index of archived
jobs, and, finally, all FreeForm masters and the index of FreeForm masters. If you keep
Job Logs, print or export the Job Log before you choose Clear Server.
To clear the ColorPASS, scroll the Functions menu and choose Clear Server. You are
asked to confirm your selection. If the Administrator password has been set, you are
prompted to enter it.
N OTE : To clear the ColorPASS without using the ColorPASS Administrator password,
you must log in to Windows NT as Administrator, and use the Clear Server command
from either the FieryBar menu or the Command WorkStation Server menu.
Choose Exit Setup from the first screen of the main Setup menu when you have
finished making Setup changes.
The ColorPASS reboots and any changes you saved during the Setup take effect.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup