ThermoWorks 9882 PRINTING DATALOGGER THERMOMETER - Manual (Page 13)

There are three measurement modes :
1. Single measurement(MEAS)
2. Multiple measurement(MEM) and 3. Auto logging (LOG).
Press ON/OFF key to measure the temperature for 9811 and
9611( No printer function ).
Press F1 (MEAS) to proceed single measurement for other
meters .
On 9812/9612, the external probe temp. is displayed on LCD
once the probe is plugged.
After entering measurement mode , press F4 (PRN) to enter
printing mode. The printing can be stopped any time by press
F1(STOP or EXIT) key while it is printing .
PH & external probe calibration mode introduction are in the
mode of Single measurement .
Definition
SINGLE MEASUREMENT
MEAS
F1 :Single Measurement
F2 F3 F4 F1
Welcome
MEAS MEM LOG SET
11
Operating the single measurement as a general meter.
The printing contrast can be changed by pressing HIGH or
LOW key .