ThermoWorks 9135-156 HART SCIENTIFIC 3-POINT IR CALIBRATOR - Manual (Page 16)

5.4 Right Side Panel
The right side panel is illustrated in Figure 2.
Test Well - The right side panel has a 6.3 mm (0.25") hole near its center that
allows access to a 3.18 mm (0.125") test well in the IR target plate. The test
well accepts 3.18 mm (0.125") RTDs, thermistor probes, or thermocouples for
calibration (see Section 8.2). The test well is also used to calibrate the 9135
against a standard RTD (see Section 9).
Calibration Access Hole - There is a small oblong hole on the right side panel.
These gives access to two potentiometers used to calibrate the 9135. DO NOT
9135 Infrared Thermometer Calibrator
User’s Guide
14
CA
UT
IO
N
:H
O
T
S
U
R
F
A
C
E
C
A
U
TI
ON
: HOT SUR
FA
C
E
C
A
U
T
IO
N
:
H
O
T
SU
RFA
CE
SET-POINT SELECT
TARGET READY
150°C
302°F
100°C
212°F
50°C
122°F
Power Switch Power Cord Socket
IR Target
Set-point
Indicators
Target Ready
Indicator
Set-point
Select
9135 INFRARED CALIBRATOR
Figure 1 Top Panel