TL Audio 5051 - Manual (Page 25)

commencing at +4dBu to full brightness at
+14dBu (Output level control at 0dB).
Peak LED:
+20dBu. Monitors Input and Output Levels.
VU
Meter: Switchable to Input level, (0VU = +4dBu),
Output level, (0VU = +4dBu),
Output +10dB, (0VU = +14dBu),
Gain Reduction (Compression).
Frequency Response:
10Hz to 40KHz, +0, -1dB.
Distortion:
Predominately second harmonic, increasing
with “Drive”
level. Typically 0.2% @ 0dBu.
Noise:
-80dBu, 22Hz to 22KHz, line input selected
at 0dBu
input and output gain, Compressor and EQ
on at 0dB.
Dynamic Range:
106dB (Line input @ 0dB gain).
Sidechain Insertion Points:
Unbalanced, switched 3 pin jack socket,
tip = send, ring = return,
Nominal level -2dBu,
Output impedance 47 ohms,
Return input impedance 10Kohms.
Power Requirements:
Internally set to 230V 50Hz or 115V 60Hz
operation,
Detachable IEC power cord,