TL Audio 5051 - Manual (Page 5)

Mic and line inputs are provided on electronically balanced XLR connectors,
and the line input is duplicated on an unbalanced mono 0.25” jack connector.
Balanced and unbalanced line outputs are provided (on XLR and jack
respectively) and these can be used simultaneously. The operating level of the
line input can be shifted from -10dB to +4dB (unbalanced) or +4dB to +18dB
(balanced) via a rear panel switch, allowing the 5051 to accept very high levels
- such as those from a digital recorder. A front panel instrument input is also
provided, thus allowing guitars, basses and keyboards to feed directly into the
5051, removing the need for a separate DI box.
Please read this manual fully before installing or operating the 5051.
2. PRECAUTIONS
The Ivory 5051 requires very little installation, but like all electrical equipment,
care must be taken to ensure reliable, safe operation. The following points
should always be observed:
- All mains wiring should be installed and checked by a qualified
electrician,
- Ensure the correct operating voltage is indicated on the rear panel
before connecting to the mains supply,
- Never operate the unit with any cover removed,
- Do not expose to rain or moisture, as this may present an electric
shock hazard,
- Replace the fuse with the correct type and rating only.