Toa TS-910 Series Manual - Manual (Page 17)

17
5.4. Infrared Delegate Units TS-902 and TS-802
1. Monitor speaker
Speech signals from other Conference units and
other audio signals from the Central unit are output
from this speaker. (Refer to the table below.)
Model Output signal
TS-902 Base language or Translation language
Note: Switchable by the Monitor selector
switch (12).
TS-802 Base language
Use the right-side Monitor Volume Control (11) to
adjust the volume. No sound is output from the
speaker of the unit in use while speaking.
2. Microphone
Use either the TS-903 (Standard) or TS-904 (Long)
dedicated microphone.
3. Microphone in-use indicator
Lights when the microphone is turned on (for
speech) and flashes when the battery level is low.
4. Infrared emitter/detector
The device used to transmit and receive infrared
communication signals is built inside this panel.
Note
Never place any object that could block infrared
PUSH
POWER
TALK
DELEGATE UNIT TS-802
1
2
3
4
6
7
8
PUSH
POWER
1 2 3
TALK
DELEGATE UNIT TS-902
1
2
3
4
5
6
7
8
[TS-902 Top] [TS-802 Top]
Note: No microphone is supplied with the TS-902/802.
18
[Rear]
18. Communication cable connection terminal
Connects to the TS-919B4 or TS-919B1
Bridge unit with a CAT-5 LAN cable.