Toa TS-910 Series Manual - Manual (Page 24)

24
6. FUNCTION SETTINGS
6.1. Setting the Maximum Number of Simultaneous Speakers
Using the Simultaneous Speaker No. Setting switch on the TS-
910 Central Unit, set the maximum total number of Conference
units that can simultaneously initiate speech.
Set the switch to [1], [2], [3], or [4] depending on the type of the
conference. These numbers indicate the number of units that can
simultaneously initiate speech. (This switch is factory-preset to
the [1] position.)
Note
When the Talk key is pressed at a unit exceeding the set maximum
number, how the corresponding unit operates can be determined
in the speech priority settings referred to in the next section.
6.2. Speech Priority Settings
Operation following the depression of the Talk key on a
Conference unit, when the maximum number of speakers that can
be simultaneously initiated is reached, can be selected with the
Speech Priority Selector switch on the TS-910 Central unit.
6.2.1. Mode A: First-in/first-out priority (factory-preset switch
position)
Speech is initiated on a first-come/first-served basis. When the
maximum number of speakers is reached, subsequent speech
requests cannot be accepted, even if the Talk key is pressed.
• Example showing the number of simultaneous speakers set to [2].
6.2.2. Mode B: Last-in/first-out priority
When the maximum number of simultaneous speakers is reached, input from the most recent subsequent Talk
key-pressed Conference unit takes precedence, thus rendering earlier speaking units inoperable.
• Example showing the number of simultaneous speakers set to [2].
Simultaneous speaker No.
setting switch
Speech priority selector switch
TALK TALK TALK
Conference unit
[First unit]
Press the talk key.
First unit: Speech possible.
[Second unit]
Press the talk key.
First unit: Speech possible.
Second unit: Speech possible.
[Third unit]
Press the talk key.
First unit: Speech possible.
Second unit: Speech possible.
Third unit: Speech not possible.
TALK TALK TALK
Conference unit
[First unit]
Press the talk key.
First unit: Speech possible.
[Second unit]
Press the talk key.
First unit: Speech possible.
Second unit: Speech possible.
[Third unit]
Press the talk key.
First unit: Speech cancelled.
Second unit: Speech possible.
Third unit: Speech possible.