Toa VX-3000DS CE-GB - Manual (Page 12)

12
[Fixing the battery]
To comply with EN54-4, fix the battery at the bottom plate surface of the rack as shown below.
Attach hook fasteners to the bottom or side surface of each battery, and loop fasteners to the bottom plate
surface of the rack.
Hook fasteners
(supplied with the VX-3000DS)
Bottom of battery
135-01-075-2
135-01-076-3 VX-2000DS FASTENER HOOK (A)
VX-2000DS FASTENER LOOP (B)
131-27-891-2 VX-2000DS THERMAL INSULATING SHEET
Part code Part name
When replacing the batteries, 4 each of fastener hooks and loops, and a thermal insulating sheet listed
below are also required. Consult your nearest TOA dealer on how you can obtain them.
Example when the hook fasteners are attached to the battery's bottom surface
4.3. Affixing Declaration of Compliance (EN 54-4 Standard)
To declare that the VX-3000DS complies with EN 54-4, affix the sticker supplied with the VX-3000DS visible to
the front panel of the equipment (e.g. at the upper right side as shown below).
EN 54-4
VX-3000DS
Rack
AC POWER BATTERY IN1
IN2 POWER
CONNECT
CONDITION
CHECK
CHARGING
EN 54-4
Sticker (supplied with the VX-3000DS)
Affix only the upper part of the
sticker to the equipment rack.
Paste this sticker on the outside
of the cabinet rack containing
the so certified equipment.