Cisco 3750 - Manual (Page 5)

Contents
v
Catalyst 3750 Metro Switch Hardware Installation Guide
OL-9160-02
Verify Switch Connections 4-2
Bad or Damaged Cable 4-2
Ethernet and Fiber Cables 4-3
Link Status 4-3
Transceiver Module Port Issues 4-3
Port and Interface Settings 4-3
Ping the End Device 4-4
Spanning Tree Loops 4-4
Monitor Switch Performance 4-4
Speed, Duplex, and Autonegotiation 4-4
Autonegotiation and NIC Cards 4-5
Cabling Distance 4-5
Clearing the Switch IP Address and Configuration 4-5
Finding the Switch Serial Number 4-6
Technical Specifications A-1
Connector and Cable Specifications B-1
Connector Specifications B-1
10/100 Ports B-1
Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices B-2
100BASE-FX Ports B-2
Connecting to 1000BASE-T Devices B-3
SFP Module Ports B-4
Console Port B-4
Cable and Adapter Specifications B-5
SFP Module Cable Specifications B-5
Two Twisted-Pair Cable Pinouts B-6
Four Twisted-Pair Cable Pinouts for 10/100 Ports B-7
Identifying a Crossover Cable B-8
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports B-8
Adapter Pinouts B-9
Configuring the Switch with the CLI-Based Setup Program C-1
Taking Out What You Need C-2
Connecting to the Console Port C-3
Starting the Terminal-Emulation Software C-3
Connecting to a Power Source C-4