USL JSD-60 Manual - Manual (Page 28)

Page 28
8.10.2 Formats Tab
The “Formats” tab allows the setting of “Per-Format” configuration. These settings apply only to a specific format.
The type of settings available varies by format type. Select the format that is to be configured using the format
buttons on the GUI or the JSD-60 front panel. Additional options are available on the Advanced tab that provides
options for selecting input source, decode options, and channel mixes on a per-format selection.
Input Trim
The input trim control is only available for the stereo Non/Sync and monaural Microphone inputs. It provides a
means to control the input level.
Preset

Preset level – The JSD-60 will adjust the main fader to the preset level when this format is selected.

Last level – The JSD-60 will adjust the main fader to the last level used on the format when this format is
selected again.

None – The JSD-60 will not change its main fader level when this format is selected.
NOTE that presets can only be changed through the GUI. This feature prevents unauthorized people from changing
the presets. You may want to use “Last Level” to allow local personnel to adjust playback levels. The main fader
level will return to the last level used on that format.
Input Delay
A separate input delay setting is available for each format to enable precise synchronization of the audio with the
projected image.