USL JSD-60 Manual - Manual (Page 59)

Page 59
Band10000=1
Band12500=1
Band16000=1
Treble=1
# The bass and treble are a shelving filter that are adjusted prior to
# the individual equalizer bands. That is if the respective bass/treble
# is enabled for automatic equalization. For each there is a cut off
# frequency and is specified below.
# Bass - Low band range, specified in units of hertz.
# Treble - High band range, specified in units of hertz.
[BassTrebleRange]
Bass=100
Treble=8000
X-Curve 150 Seats.ini
In the RTA view there is a set of upper, desired, and lower limit lines. The RTA bands are drawn in columns with a
rectangular indicator for its level. The columns are designed to line up with the graphic equalizer controls below
them. The limit lines follow this format in being shown as a line at a given level for each band. Depending on the
size of the auditorium, (then number of seats), a respective set of limits is used, curve. The user can use the
provided curve files located in My Documents\USL\JSD-60\EQ Curves folder. As with other text based “.ini” files
the user can create custom curve files. The Automatic Equalization process will use the limits in the setting the
levels for each band.
[Curve]
Name=X-Curve150Seats
[Band25Hz]
Value=-3
Max=0
Min=-8
[Band31Hz]
Value=-2
Max=1
Min=-7
[Band40Hz]
Value=-1
Max=2
Min=-6
[Band50Hz]
Value=0
Max=3
Min=-5
[Band63Hz]
Value=0
Max=3
Min=-4
[Band80Hz]
Value=0
Max=3
Min=-3
[Band100Hz]
Value=0
Max=3
Min=-3