USL DAX-602 - Manual (Page 20)

DAX-602/802
INSTRUCTION MANUAL Ultra Stereo Labs, Inc.
- 20 -
Select the update fi le provided by USL, then click on “Update DAX.” The update
process will take several minutes. When it is almost complete, you will see the
LEDs on the front of the DAX fl ash. The web browser will then show an empty
screen. You can then type the IP address or host name in the browser address
fi eld to re-establish communications with the unit.
Restore Factory Defaults
You can restore the original factory software, network settings, and confi guration
password by disconnecting the power to the DAX, removing the cover, shorting
J8 pins 3 and 4, then connecting the power. During the restore, the LEDs will
fl ash. When they stop fl ashing, remove power, remove the short, then apply power
again. The original software and confi guration have returned.