Cisco 3560 - Manual (Page 82)

4-6
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 4 Troubleshooting
Locating the Switch Serial Number
The switch now behaves like an unconfigured switch. You can configure the switch by using Express
Setup as described in the switch getting started guide that is included with the switch.
You can also configure the switch by using the CLI setup procedure described in Appendix D,
“Configuring the Switch with the CLI-Based Setup Program.”
Locating the Switch Serial Number
If you contact Cisco Technical Assistance, you need to know the serial number of your switch. See
Figure 4-1 through Figure 4-5 to locate the serial number on your switch. You can also use the show
version command to get the serial number.
Figure 4-1 Serial Number Location on the Catalyst 3560-24PS and 3560V2-24PS Switch
Figure 4-2 Serial Number Location on the Catalyst 3560-24TS-S and 3560V2-24TS Switch
Figure 4-3 Serial Number Location on the Catalyst 3560-48PS and 3560V2-48PS Switch
RATING 100-200V ~ 5.0A-2.5A, 50-60 HZ
CONSOLE
DC INPUTS FOR REMO
TE POWER SUPPL Y SPECIFIED IN MANU
AL +12v @7.5A -48 @7.8A
116113
SN: AAANNNNXXXX
CONSOLE
126758,
781-00304-01A0
SN: XXXNNNNXXXX
RATING 100-200V ~ 5.0A-2.5A, 50-60 HZ
CONSOLE
DC INPUTS FOR REMO
TE POWER SUPPL Y SPECIFIED IN MANU
AL +12v @7.5A -48 @7.8A
116112
SN: AAANNNNXXXX