Vizualogic RoadTrip Elite 9 - Manual (Page 23)

Ins tallation and Conn ections
22
7 Installing the power cable
Please choose a way to route the power cable.
A.
Line through the buckle
1) Push the power cable into the buckle of the
headrest stanchion carefully. If you run into any
obstacles, please rotate the cable or pull back
slightly and push again to pass through.
2) The power cable should pass through the bottom
of the seat finally. (Figure 7-1)
B.
Line through the backplane of the seat
If there is a backplane of the seat, please remove it
carefully. Pull the power cable to the bottom of the
seat and reset back the backplane of the seat.
(Figure 7-2)
(Figure 7-2)
Power Cable
Seatback Cover
(Figure 7-1)
Monitor
Headrest stanchion
Buckle
Power Cable