Vizualogic A-1285 - Manual (Page 13)

™
11
sysTem seTTInGs
Press SETUP on the Remote Control to enter the system setting menu.
GOTO GENERAL SETUP PAGE
TV Display
angle Mark
OsD language
CapTiOns
sCreen saVer
lasT MeMOry WiDe
On
eng
Off
On
On
--GENERAL SETUP PAGE--
Current Item

Current Item

On the Remote Control, press either the  UP or  DOWN or  LEFT or

RIGHT arrow buttons to move to the desired menu item and press PLAY to
select the menu item.
GOTO GENERAL SETUP PAGE
--GENERAL SETUP PAGE--
TV Display
angle Mark
OsD language
CapTiOns
sCreen saVer
lasT MeMOry
ps
On
eng
Off
On
On
4:3 pansCan
4:3 leTTerbOx
16:9
set TV Display mode to the correct ratio:
• Press the  rIGHT arrow buttons to enter the sub-menu. If you want
to set the screen to "WIDE", press the  DoWn arrow twice to move
your selection until the "WIDE" item is selected, press enTer to select.
• Press seTup to exit these system settings.
noTe: There are three (3) screen ratio modes available: 16:9 WIDE, 4:3LB
(Letter Box) and 4:3PS (Pan Scan). Different disc formats will display
different images depending on the screen setting and size used. Here is an
example of the different screen ratio format.