Vizualogic RoadTrip GPS Mirror - Manual (Page 16)

2) Answering the call through the Bluetooth:
3) Switch the call to the mobile phone:
The call log is from the cell phone, so some data can not be displayed because of incompatibility of
some mobile phones.
After successfully pairing your mobile phone, when there is a incoming call, the system will display the
phones number automatically and play the ring tone of the mobile phone.
If you do not want to hear the call on the Gps device click the on the touch panel and the call
will transfer to your mobile device.
4) You can still hang up the call with the symbol on the interface, after you switch the call to
your cell phone.
5) If you need to use the touch pad to dial a extension you can touch the symbol on the
interface.
6) After you touch the symbol you will see the keypad pop up on the interface, as shown in the
picture below.