2 resetting the system settings, See section 10.7.2 r, Esetting – YSI MultiLab 4010-3 User Manual
Page 101: System, Settings
Advertising
MultiLab 4010-3
Settings
ba76143e03
08/2013
101
10.7.2 Resetting the system settings
The following system settings can be reset to the default condition:
The system settings are reset in the menu, Storage & config / System / Reset.
To open the Storage & config menu, press the <ENTER_> key in the measured
value display.
Setting
Default settings
Language
English
Audio signal
on
Baud rate
4800 Baud
Output format
ASCII
Decimal separator
Dot (xx.x)
Brightness
10
Temperature unit
°C
Stability control
on
Advertising