Philips AJ3600 - Manual (Page 6)

ALARM
ALARM ON ALARM OFF
Switching on alarm 1 tP
• Set function switch © to AUTO and the alarm
function is switched on.
• Select ALARM 1 with alarm switch © On the
display indicator AL1 ©will light up. You have now
switched on alarm 1.
• At the set alarm time 1 you will be woken by the
radio.
Switching on alarm 2
• Set function switch © to AUTO and the alarm
function is switched on.
• Select ALARM 2 with alarm switch © On the
display indicator AL.2 ©will light up. You have now
switched on alarm 2.
• At the set alarm time 2 you will be woken by the
buzzer.
Switching on dual alarm
The clock radio can also wake you at two different
alarm times on the same day. For this you should use
the dual alarm.
• Set the function switch © to AUTO. The alarm
function is now switched on.
• Select 1 + 2 with alarm switch © Indicator AL.1 ©
and AL2 © will light up.
• You will be woken at alarm time 1 by the radio and
at alarm time 2 by the buzzer.
You can switch off the alarm in two ways.
Switching off temporarily
• Press ALARM REPEAT button © With this button
you can switch off the alarm temporarily. After 7
minutes the alarm (radio and/or buzzer) will come on
again. If you press the ALARM REPEAT button again,
then the same thing will happen.
Switching off permanently
• By setting the function switch © to OFF you will
switch all alarm functions off. On the display indicator
AL1 ©and AL2 ©will go out.
If you want to be woken again the next day. then you
must reset switch ©to AUTO before going to sleep.
• If you are using the dual alarm, then you should
also set function switch ©to OFF in order to switch
off the respective alarm. After this you should
however reset the function switch to AUTO, so that
you are also woken at the other alarm time.
If you fail to switch off the alarm yourself, then the
alarm call will always stop automatically after one
hour.