Canon DR-5060F - Manual (Page 22)

20 System Requirements
System Requirements
To use the DR-5060F, you need the following items in addition to the standard
accessories:
•
Computer
• SCSI card
• SCSI cable
• Application
• Camera unit
• Microfilm
MEMO
● For details on installation of the main unit, see “About the Installation
Location” (P. 7) under “Safety Precautions.”
● The driver may not function properly depending on the application you are
using.
● Select a computer, operating environment and SCSI card to suit the driver
application you are going to use.
● The SCSI connector used for this unit is a half-pitch 50-pin (pin type)
connector. Check the shape of the connector for the SCSI card on the
computer or the SCSI device to be connected to the computer, and prepare
a SCSI cable that is compatible with this unit.