Canon DR-5060F - Manual (Page 42)

40 About Operation Modes
About Operation Modes
The DR-5060F is provided with three operation modes: the Backup mode,
Scanner Only mode and Filmer Only mode. The Backup mode is for backing up
images to microfilm as the document is being scanned. The Scanner Only mode is
for using the DR-5060F exclusively as a scanner and not to photograph document
images to microfilm. The Filmer Only mode is for using the DR-5060F exclusively
as a rotary filmer. You can check and change the operation mode by the Backup
key. The DR-5060F also has a Count Only mode for just counting the number of
documents without scanning them.
Checking the Operation Mode
You can check and set the scanner’s operation mode by the Backup and Count
Only keys on the operation panel.
A
FILM E F
Feeding Option
New File
Count Only
Manual
Auto
Semi-Auto
1 2 3 4 5 6
Space/Trailer Backup
Scanner
■ Backup key lit: Backup mode
In this mode, images of the scanned document are backed up to microfilm while
they are transferred to computer at the same time.
■ Backup key out: Scanner Only mode
In this mode, the DR-5060F is used exclusively as a scanner, and images of the
scanned document are not backed up to microfilm.
■ Backup key blinking: Filmer Only mode
In this mode, the DR-5060F is used as a rotary filmer. Scan operations from the
computer are disabled, and scanning is instructed by selecting the feeding option
on the Feeding Option key on the operation panel. (See “Selecting the Feeding
Option” P. 45)
Backup key
Count Only key