Canon DR-5060F - Manual (Page 87)

85
Dail
y Cleaning
5
Specifications
Dimensions
with tray closed 447 (H) x 535 (W) x 671 (D) mm
[17.5 (H) x 20.8 (W) x 26.1 (D) in]
with tray open 486 (H) x 535 (W) x 839 (D) mm
[18.9 (H) x 20.8 (W) x 32.7 (D) in]
Weight Approx. 48 kg (105.8 lb.)
Power requirement AC 220-240V (50/60 Hz), 0.6A (max)
AC 120V (60 Hz), 1A (max)
Power consumption 220 W
Noise Less than 70 dB
Operating environment Temperature: 10
°
C to 32.5
°
C (50
°
F to 90.5
°
F)
Humidity: 20% to 80%RH
Options
Camera unit 57X
This camera unit is for photographing documents in the duplex mode with the
1/57 magnification lens.
Camera unit 24X
This camera unit is for photographing documents in the simplex mode with the
1/24 magnification lens.
Endorser ED600
Attached on the main unit, this endorser stamps an 8-digit number and any
specified characters on the rear side of the document after it is scanned.
Imprinter 5000
Attached inside the main unit, this imprinter prints characters such as counter
numbers, alphabet characters and symbols on the front side of the document
while it is being scanned.
Barcode Decoder 5000
This control board is mounted inside the main unit, and reads and recognizes
bar codes in the document.
Patch Code Detector
This control board is mounted inside the main unit, and reads and recognizes
patch codes in the document.
NOTE
The bar code decoder cannot be mounted at the same time as the patch code
detector. For details, contact your place of purchase or a Canon service
department.
Consumables
Microfilm CK III
● For details on options and consumables, contact your sales agent or a Canon
service department.
● Specifications are subject to change without notice.