Cd player, Playing a cd, Selecting a different track – Philips AZ1060 User Manual
Page 18: Finding a passage within a track
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD PLAYER
s
(0
Playing a CD
1.
Select
CD
source.
/_ □' is displayed briefly and the function indication lights up.
2.
Press OP^*CLOSE to open the CD door.
Display:
¡_
q
' op^n when you open the CD door.
3.
Insert a CD or CD-R(W) with the printed side facing up and
close the CD door.
-* Display:
d iSC
flashes as the CD player scans the contents of
a CD. The total number of tracks and playing time are then
shown.
4.
Press PLAY»PAUSE ►II to start playback.
Display: Current track number and elapsed playing time of the
track during CD playback.
5.
To interrupt playback press PLAY»PAUSE HI.
Press PLAY»PAUSE ►!! again to resume play.
The display freezes and the elapsed playing time flashes when
playback is paused.
6.
To stop CD playback, press STOP ■
7. To switch
off,
adjust the POWER slider to TAPE/
off
position
with the keys on the tape deck released.
The function indicator goes out.
JVote: CD play will also stop when:
- the CD door is opened;
- the CD has reached the end
(unless you have selected HEPEAT or REPEAT ALL);
- you select another source: TAPE
/
TUNER.
Selecting a different track
• Press SEARCH or once or repeatedly until the desired
track number appears in the display.
• If you have selected a track number shortly after loading a CD or
in the PAUSE position, you will need to press
PLAY»PAUSE H
i
to start playback.
Finding a passage within a track
1.
Press and hold down on SEARCH
i**
or ►►!.
-»The CD is played at high speed and low volume.
2.
When you recognize the passage you want,
release SEARCH r« or
- Normal playback continues.
Note:
During a CD program or If SHUFFLE/ REPEAT active, searching is
only possible within a track.
Di
Yoi
pla
SF
SF
RE
RE
1.
2.1
3.'
Pn
Pro
the
Up
u
7.1
3.F
4.F
Rei
Inti
the
12