Philips MX3690B - Manual (Page 10)

F eature M enu C ontrols
c iianm ; i .
Al TO-PKOiiKAMMINi;
y 'our TV can automatically set itself
for local area (or Cable TV)
channels. This makes it easy for you
to select only the TV stations in your
area when the CHANNEL A Y
buttons are pressed.
NOTE: If you went through First
Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
( BECIN)
<1> Select CHANNEL MEMORY
(START AUTO-PROGRAMMING)
control.
With the FEATURES MENU on
screen, move the RED highlight with
the MENU (M)t»^ buttons. Then
press the MENU button.
<l> Press the MENU button to turn
AUTO-PROGRAMMING ON.
The TV shows which channel
numbers are "SAVED" (t^) as they
are added into memory.
"Auto-programming CHANNEL
MEMORY is finished" shows when
the TV is through adding channels.
<^3^ Press the STATUS or Menu (M)
button to clear the screen.
S maui
Try it out. Press the
g CHANNELAT buttons
and see which chaimels you can
select.
Remember, an Antenna or Cable
TV signal must first be connected
to your TV so that chaimels can be
saved.
If you want to delete any
unwanted chaimels from the TV's
memory, see "ADD/DELETE
CHANNELS" on the next page.
10