Amplifier operation, Selecting the component, Listening to fm/am radio – Sony HT-DDW675 User Manual

Page 19: Automatic tuning, Selecting the component 1

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Amplifier Operation

Selecting the component

1

Press input buttons to select the input.

Listening to FM/AM radio

To select the

Press

VCR

VIDEO 1 or
VIDEO 2

DVD player

DVD

Super Audio CD or

SA-CD/CD

CD player

Built-in tuner (FM/AM)

FM or AM

2

3

The selected input appears in the display.

Turn on the component and start

playback.

Note

If you select any video components, set the TV’s

video input to match the component you selected.

Turn MASTER VOLUME -/+ to adjust
the volume.

Note

To avoid damaging your speakers, make sure that

you turn down the volume before you turn off the
receiver.

To mute the sound

Press MUTING on the remote.

The muting function will be canceled when you

do the following.

• Press MUTING on the remote again.

• Turn the power off.

• Increase the volume.

To use the headphones

Connect the headphones to the PHONESjack.

• When the headphones are connected, speaker output

is automatically canceled and “SP” does not light up
in the display.

• When the headphones are connected, you can select

only the following sound fields (page 25).

- HP2CH(HEADPHONE 2CH)

- HP THEA (HEADPHONE THEATER)

You can listen to FM and AM broadcasts

through the built-in tuner. Before operation,

make sure you have connected the FM and AM

antennas to the receiver (see page 11).

Tip

The tuning scale is:

FM: 100 kHz

AM: 10 kHz*

* The AM tuning scale can be changed (see page 38).

Automatic tuning

If you do not know the frequency of the station

you want, you can let the receiver scan all

available stations in your area.

1

Press FM or AM to select the FM or AM

band.

The last received station is tuned in.

2

Press TUNING + or TUNING -.

Press TUNING + to scan from low to high;

press TUNING - to scan from high to low.

The receiver stops scanning whenever a

station is received.

Tip

If “STEREO” flashes in the display and the FM stereo

reception is poor, press FM MODE to change to
monaural (MONO). You will not be able to enjoy the

stereo effect, but the sound will be less distorted. To

return to stereo mode, press FM MODE again.

>

3

■o

o

■o

<D

S

5'

19

US

Advertising