Carrier 50CD/CH - Manual

Number One
AirConditbning
Maker
I Division of
" Carrier Corporatio
Instiillation, Start-U|5
and Service Instructions
Carrier Parkway • Syracuse NY 13221
Single-Package Cooling Units
SAFETY CONSIDERATIONS
Installation and servicing of air conditioning
equipment can be hazardous due to system pressure
and electrical components. Only trained and quali­
fied service personnel should install, repair or
service air conditioning equipment.
Untrained personnel can perform basic mainte­
nance functions of cleaning coils and filters and
replacing filters. All other operations should be per­
formed by trained service personnel. When working
on air conditioning equipment, observe precautions
in the literature, tags and labels attached to the unit
and other safety precautions that may apply.
Follow all safety codes. Wear safety glasses and
work gloves. Use quenching cloth for unbrazing
operations. Have fire extinguisher available for all
brazing operations.
INSTALLATION
Unit Rigging and Placement — Inspect for trans­
portation damage. File any claim with transporta­
tion agency. Spreader bars are not required if top
crating is left on unit. Keep unit upright. Do not
drop unit (see Fig. 1). Rollers may be used to move
unit across a roof. Level by using frame as a refer­
ence. Leveling tolerance is ± 1 / 16-in. per linear foot
in any direction. This is necessary for condensate
drain to function properly. Table 1 shows unit
weight. See Fig. 1 for rigging details.
Fig. 1 — Rigging Details
© Carrier Corporation 1983 Form 50CD-23SI