Carrier 09BB - Manual

Carrier
fnsfallatîon Instructions^^
Air-Cooled Condensing Units
(includes 50BD Combination)
General - The 09BB012 condenser can be coupled
with a 50BB008 or 012 Weathermaker® unit to
form a 50BD combination.
The condenser is designed to match with, or
arranged to be field mounted to the back of
50BB units.
The condenser can also be mounted remote.
Air discharge can be vertical or horizontal, in
or out the same face.
Receiving the Unit ~ Inspect unit for shipping dam­
age. Enter any claims directly with the transporta­
tion company.
Carrier Air Conditioning Company will not be
responsible for damage incurred in transit.
Uncrating - Remove unit and hardware from ship­
ping skid. Check to see that unit and component
parts conform to the bill of lading. Contents of
fastener package are listed in Table 1.
Before Installation - Check space requirements,
service clearances, floor strength, location of
piping, size of power supply, and location of duct­
work (Fig. 2 and Fig. 3).
Make sure rigging equipment is adequate, Avoid
undue force against side and front panels when
lifting unit.
Table 1 - Fastener Package Contents
UNIT QUANTITY DESCRIPTION
1 4 Locking bolt 1/4-20 1" hex hd
2 2 Vibration isolators
3 2 Support bolt 5/16-18 3" hex hd
4 2 Support bolt nuts 5/16-18
5 2 Channel bolts 3/8-16 x 1" hex hd
6 2 Lockwashers 3/8"
7 4 Thd forming screws 1/4 x 1-1/4"
8 4 External locktooth washers 1/4"
9 2 Plain washers 5/16"
Fig. 2 - Mounting Arrangements
Carrier Corporation 1967 Printed in U.S.A. 6-67 09BB-1SI