A caution, Fig. 3 — rigging details – Carrier 50HJ015 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EVAPORATOR-
FAN MOTOR
EVAPORATOR-
FAN MOTOR
CURB (50P0900I5I)
TRANSITION DUCT
Fig. 2 — Horizontal Supply/Return Curb Details
DIMENSION A
UNIT 50HJ
Ft-in.
mm
015
3-0
914
024
3-4’/2
1029
ÊJ
NOTES;
1. Dimensions in ( ) are in miilimeters
2 Refer to Tabie 1 for unit operating weights.
3. Remove boards at ends of unit and runners prior to rigging.
4 Rig by inserting hooks into unit base raiis as shown. Use corner
post from packaging to protect coii from damage. Use bumper
boards for spreader bars.
5 Weights do not inciude optionai economizer See Table 1 for econo
mizer weight.
6.
Weights given are for aluminum evaporator coii plate fins and
copper condenser coii piate fins Weights of other metai combi
nations are listed in Table 1
A CAUTION
All panels must be in place when rigging.
Fig. 3 — Rigging Details