4 connection to power – CITIZEN CLP-2001 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1.4 Connection to Power
A
CAUTION; Use the three-pin (including grounding) gu.tle{.,. |
Otherwise, you may get hurt by static'eiectricity.
Also, you may get an electric shock wheh^the 'printer
breaks down or short circuit occurs or a ttpunderbolt;
falls.
.
^
Connect to power as follows;
■
1) Check that the power switch on the printer is turned off^-c:
s?
2) Connect the connector of the power cord to the powerfnlet Smthe printer.
3) Insert the plug of the power cord in the outlet.
: ?>.■
1-8
Advertising